D11 XE
The Cat® D11 XE is the most efficient, highest-producing D11 ever. It's built on a legacy of performance and reliability, with a Caterpillar-designed electric powertrain that improves fuel efficiency and increases productivity.It's a flexible machine that can handle any application you throw at it, no matter how harsh the conditions of your site. It's easier to operate and maintain, and it's built to last 20% longer between rebuilds. The result? You'll move more material per hour, use less fuel, produce less greenhouse gas and achieve a lower total cost of ownership.
Product Images
D11 XE Dozer
D11 XE Dozer
D11 XE Dozer
D11 XE Dozer
Product Videos
Overview Video
Mark Williamson Operator Perspective
Sam Moss Operator Perspective
Scott Wassoen Operator Perspective
Virtual Product Tour (VPT)
D11 XE Virtual Product Tour
Specifications
| Name | Type | Value | Unit Value (Imperial) | Unit Name | Unit Value (Metric) | Unit Name (Metric) |
|---|---|---|---|---|---|---|
| Engine Model | text | Cat® C32B | ||||
| Engine Power - Net SAE J1349/ISO 9249 - Forward | measurement | 861 | hp | 742 | kW | |
| Displacement | measurement | 1959 | in³ | 32.1 | l |
Documents & Spec Sheets
Features & Benefits
Performance & Efficiency
- First-of-its-kind electric drive powertrain built on Caterpillar's deep electrification experience
- Up to 25% less fuel burned per unit of material moved compared to the D11
- Delivers optimized power to the ground, working more efficiently over a wider range of speeds and loads
- Single-plane cooling system enables better heat rejection
- Multiple blade options and three tilt cylinder options maximize productivity in a wide range of applications
- C32B engine delivers the performance you expect with heavier duty internals for improved reliability
- High horsepower reverse speeds up non-productive traveling for shorter cycle times
Operator Comfort
- Unparalleled operator environment designed to reduce effort and exposure
- Intuitive touchscreen display gives operators access to key machine information, giving real-time feedback to optimize productivity
- Suspended undercarriage absorbs impact and reduces shock loads by up to 50%
- Fully adjustable air suspension seat
- Ergonomic controls, including low-effort electronic steering, ripper and dozer controls keep operators in control and reduce fatigue
- Reduced noise and vibration, as well as improved airflow for maximum comfort
- 3 dB quieter than the D11 for both operator and spectators
Safety
- Improved operator visibility with clear lines of sight to front and rear work areas, as well as optional 360-degree vision system
- Third-generation powered ladder for safer access and egress
- Automatic engine shutoff if dozer is tipped or rolls over
- Seatbelt monitor and Operator Not Present monitoring system
- Ready for Cat MineStar Detect and Command
Technology & Innovation
- Autocarry™ provides automatic blade control during carry operations, reducing operator fatigue and increasing productivity up to 15%
- Grade Control 3D uses ROPS-mounted GNSS antennas and blade-mounted sensors to increase accuracy, enhance safety, and reduce the number of people required on site
- Automated Blade Assist increases efficiency with automated blade movements to preset pitch positions
- Automatic Ripper Control monitors and adjusts engine speed and ripper depth to minimize track slip and maximize productivity
Cat MineStar™ Solutions
- Terrain for grading provides onboard guidance tools and real-time feedback to help operators maximize efficiency and reduce rehandling of material
- Terrain with Blade Control speeds up dozing, decreases fuel burn and minimizes overcut, overfill and rehandling
- Command for dozing provides multiple levels of automation, from line-of-sight control of a single machine to semi-autonomous control over multiple dozers from a single remote station
Serviceability
- Modular design allows you to service major components without affecting surrounding areas
- Electric drive powertrain features 60% fewer parts and requires less frequent replacement of major components
- Lower high-idle engine speed reduces wear and tear for enhanced machine life
- Increased planned component repair time from 15,000 to 18,000 hours
- Automatic machine protection features keep the machine from damaging itself due to environmental factors or improper operation
Blades & Attachments
- Best-in-class attachments designed with decades of experience in research and development
- All blades are constructed of high-tensile-strength materials for high productivity over a long life
- 29.3° interior angle between the back bottom of the blade and the ground allows blades to better penetrate and load in tough conditions
- Superior loadability with heavy moldboard construction and bolt-on hardened cutting edges and end bits
Built to Go The Distance
- Frame, powertrain and major components are built to be rebuilt using new, remanufactured or rebuilt parts and components
- Longer rebuild intervals — achieves the same operating hours in an average 75,000-hour lifecycle with one fewer rebuild than the D11
- Robust variable piston pumps in the load-sensing hydraulic system run cooler for longer component and seal life
Mining For a Better World
- Electric drive powertrain reduces fuel consumption and greenhouse gas emissions with no impact on machine performance
- Built to be rebuilt, allowing you to achieve like-new performance at a far lower cost in energy, emissions and materials than using new components
- C32B engine meets U.S. EPA Tier 4 Final, EU Stage V and other equivalent emissions standards
- Maintenance-free diesel oxidation catalyst aftertreatment solution eliminates the need for DEF and reduces total fluid consumption
Complete Specifications
Engine - U.S. EPA Tier 4 Final/EU Stage V
| Name | Type | Value | Unit Value (Imperial) | Unit Name | Unit Value (Metric) | Unit Name (Metric) |
|---|---|---|---|---|---|---|
| Engine Model | text | Cat® C32B | ||||
| Engine Power - Net SAE J1349/ISO 9249 - Forward | measurement | 861 | hp | 742 | kW | |
| Displacement | measurement | 1959 | in³ | 32.1 | l | |
| Engine Power - Net SAE J1349/ISO 9249 - Reverse | measurement | 956 | hp | 713 | kW | |
| Note (1) | text | *Excludes all fan losses. | ||||
| Note (2) | text | Engine ratings apply at 1,600 rpm. | ||||
| Note (3) | text | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. | ||||
| Engine Model | text | Cat® C32B | ||||
| Displacement | measurement | 1959 | in³ | 32.1 | l | |
| Engine Power - Net SAE J1349/ISO 9249 - Forward | measurement | 861 | hp | 742 | kW | |
| Engine Power - Net SAE J1349/ISO 9249 - Reverse | measurement | 959 | hp | 715 | kW | |
| Note (1) | text | *Excludes all fan losses. | ||||
| Note (2) | text | Engine ratings apply at 1,600 rpm. | ||||
| Note (3) | text | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. | ||||
| Fuel Tank - Usable Volume | measurement | 466 | gal (US) | 1763 | l | |
| Cooling System | measurement | 50.7 | gal (US) | 192 | l | |
| Engine Crankcase | measurement | 35.1 | gal (US) | 133 | l | |
| Powertrain | measurement | 120 | gal (US) | 494 | l | |
| Power Train - Refill Volume | measurement | 109.6 | gal (US) | 415 | l | |
| Final Drive - Each | measurement | 10.6 | gal (US) | 40 | l | |
| Roller Frames - Each | measurement | 24.8 | gal (US) | 94 | l | |
| Hydraulic Tank | measurement | 42.2 | gal (US) | 160 | l | |
| Hydraulic System Tank and Chassis | measurement | 64.7 | gal (US) | 245 | l | |
| Hydraulic System Chassis + Blade and Ripper (Standard) | measurement | 117.6 | gal (US) | 445 | l | |
| Hydraulic System Chassis + Blade and Ripper (Carrydozer) | measurement | 143.4 | gal (US) | 540 | l | |
| Operating Weight | measurement | 238,794 | lb | 108 314 | kg | |
| Operating Weight - Carrydozer | measurement | 257,958 | lb | 117007 | kg | |
| Note (1) | text | Operating weight includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. | ||||
| Note (2) | text | CD Operating Weight includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. | ||||
| Pump Type | text | Variable displacement piston pump | ||||
| Combined Pump Output - Implement | measurement | 177 | gpm | 670 | L/min | |
| Width - Shoe | measurement | 28 | in | 710 | mm | |
| Width - Shoe - CD | measurement | 36 | in | 915 | mm | |
| Shoes/Side | text | 41 | ||||
| Grouser Height | measurement | 4 | in | 101 | mm | |
| Pitch | measurement | 12.5 | in | 318 | mm | |
| Ground Clearance* | measurement | 30.6 | in | 777 | mm | |
| Track Gauge | measurement | 114 | in | 2896 | mm | |
| Length - Track on Ground | measurement | 175 | in | 4444 | mm | |
| Ground Contact Area | measurement | 9781 | in² | 6.3 | m² | |
| Ground Contact Area - CD | measurement | 12605 | in² | 8.1 | m² | |
| Track Rollers/Side | text | 8 | ||||
| Number of Carrier Rollers | text | 1 per side (optional) | ||||
| Note (1) | text | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. – If equipped with R-1234yf (Global Warming Potential = 0.501), the system contains 1.75 kg of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (2.2 lbs). – If equipped with R-134a (Global Warming Potential = 1430), the system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons). | ||||
| ROPS | text | Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 | ||||
| FOPS | text | Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II | ||||
| Sound (1) | text | The exterior sound pressure level for the standard machine (ISO 6396:2008) is 113 dB(A) (sound suppressed). | ||||
| Sound (2) | text | The operator equivalent sound pressure level (ISO 6396:2008) is 76 dB(A) (sound suppressed). | ||||
| 1.0 Forward | measurement | 2.5 | mile/h | 4 | km/h | |
| 2.0 Forward | measurement | 4.4 | mile/h | 7.1 | km/h | |
| 3.0 Forward | measurement | 7 | mile/h | 11.3 | km/h | |
| 1.0 Reverse | measurement | 3 | mile/h | 4.9 | km/h | |
| 2.0 Reverse | measurement | 5.4 | mile/h | 8.7 | km/h | |
| 3.0 Reverse | measurement | 7 | mile/h | 11.3 | km/h | |
| Semi-Universal (SU)* Capacity | measurement | 35.6 | yd³ | 27.2 | m³ | |
| Semi-Universal (SU)* Width Over Endbits | measurement | 219.8 | in | 5584 | mm | |
| U-Blade Capacity | measurement | 45 | yd³ | 34.4 | m³ | |
| U-Blade Width | measurement | 249.6 | in | 6340 | mm | |
| Reclamation Universal - Blade capacity (SAE J1265) | measurement | 55 | yd³ | 42 | m³ | |
| Reclamation Universal - Width with blade (over end bits) | measurement | 251.9 | in | 6395 | mm | |
| Carry Dozer - Blade capacity (SAE J1265) | measurement | 57 | yd³ | 43.6 | m³ | |
| Carry Dozer - Width with blade (over end bits) | measurement | 263.9 | in | 6704 | mm | |
| Maximum penetration force * (shank vertical) | measurement | 68,195 | lb | 303 | kN | |
| Maximum penetration depth (standard tip) | measurement | 63.5 | in | 1612 | mm | |
| Pryout Force | measurement | 146991 | lb | 654 | kN | |
| Maximum penetration force * (shank vertical) | measurement | 68,434 | lb | 304 | kN | |
| Maximum penetration depth (standard tip) | measurement | 85.5 | in | 2172 | mm | |
| Pryout Force | measurement | 146376 | lb | 651 | kN | |
| Overall Beam Width | measurement | 131.1 | in | 3330 | mm | |
| Maximum Penetration Force - Shank Vertical | measurement | 69,112 | lb | 307 | kN | |
| Maximum Penetration - Standard Tip | measurement | 43.3 | in | 1100 | mm | |
| Pry-Out Force - Multi-Shank Ripper with One Tooth | measurement | 144,785 | lb | 644 | kN | |
| Ground Clearance* | measurement | 31.4 | in | 798 | mm | |
| Track Gauge | measurement | 114 | in | 2896 | mm | |
| Width - Over Trunnions | measurement | 172.4 | in | 4379 | mm | |
| Height - FOPS Cab* | measurement | 173.4 | in | 4405 | mm | |
| Height - Top of Stack* | measurement | 179.1 | in | 4549 | mm | |
| Height - ROPS/Canopy* | measurement | 185.9 | in | 4723 | mm | |
| Drawbar Height (Center of Clevis)* | measurement | 37.1 | in | 942 | mm | |
| Length - Track on Ground | measurement | 175 | in | 4444 | mm | |
| Overall Length - Basic Tractor | measurement | 242.5 | in | 6160 | mm | |
| Length - Basic Tractor - With Drawbar | measurement | 242.5 | in | 6160 | mm | |
| Length - With SU-Blade** | measurement | 337.8 | in | 8579 | mm | |
| Length - With U-Blade | measurement | 340.2 | in | 8641 | mm | |
| Length - With Single-Shank Ripper | measurement | 319.2 | in | 8107 | mm | |
| Length - With Multi-Shank Ripper | measurement | 331.8 | in | 8427 | mm | |
| Width - Without Trunnions - Standard Shoe | measurement | 148.9 | in | 3782 | mm | |
| Note (1) | text | *Includes grouser height for total dimensions on hard surfaces. | ||||
| Note (2) | text | **CD Blade on D11/D11 XE CD |
Standard Equipment
OPERATOR ENVIRONMENT
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seat – Cloth with Air suspension
- Cab Glass – Single-Pane Tinted Safety
- Cab Access – Blade Push Arm Steps and Grab Handle
CAT TECHNOLOGY PRODUCTS
- VIMS
- Automated Blade Assist (ABA)
- Cat Product Link™ Elite (cellular)
CAT POWER TRAIN
- Cat C32B Engine – U.S. EPA Tier 4 Final/EU Stage V
- High-Performance Single-Plane Cooling Module
- Variable Speed Dual Path Electric Drive
- Tiller Steering – Electronic Control
UNDERCARRIAGE
- Suspension Type Undercarriage
- Sleeve Bearing Track
- Lifetime-Lubricated Rollers and Idlers
- Track Shoes (ES): 710/810/915 mm (28/32/36 in) Width (various configurations)
HYDRAULICS
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Dozer Blade – Dual Tilt
- Electronically Enabled Blade – Quick Drop
ELECTRICAL
- 24V Electric Start, Dual Starters
- Batteries – 4 × 4,200-Amp Hour, 12V
- Battery Isolation
- Lights – LED – 13 Positions
SERVICE AND MAINTENANCE
- Ecology Fluid Drains – All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change – Engine and Transmission
- Ground-Level Fast Fuel Fill
- Ground-Level Electrical Service Station
- S·O·SSM Fluid Sampling Ports
- Diagnostic Connector
Optional Equipment
CAT POWER TRAIN
- Cat C32B Engine – Non-certified, equivalent to U.S. EPA Tier 2
- Hydraulic Cooling Fan – Automatic Reversing
OPERATOR ENVIRONMENT
- MineStar™ Terrain Display
- Visibility – Dual Camera
- Visibility – Four Cameras, 360 Degree View
- Visibility – Camera – Ripper Tip View
- Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
- Cab Glass – Dual-Pane Laminated Impact Safety
- Cab Glass – High-Pressure Safety (40 psi/275 kPa)
- Cab Access – Powered Ladder
CAT TECHNOLOGY PRODUCTS
- AutoCarry™
- Auto Ripper Control
- Cat Terrain with 3D Blade Control
- Cat Terrain Ready
- Cat Product Link Elite Dual Mode (cellular + satellite)
- Cat Command for Dozing Ready
UNDERCARRIAGE
- Track Links – Heavy Duty XL – Duralink
- Track Shoe – Abrasion Resistant
- Track Shoe – Anti-Packing Round Hole
- Abrasion Rollers and Idlers
- Cold Weather Rollers and Idlers
- Carrier Roller
HYDRAULICS
- Carrydozer Hydraulics
- Dozer Extended Blade Pitch
- Ripper Pin Puller
ELECTRICAL
- Battery Isolation – Dual Pole
- Lights – LED Premium Package – 13 positions
SERVICE AND MAINTENANCE
- Sound Reduction Sealed Bottom Guards
- Ground-Level Fluid Fill and Drain
- Ripper Lubrication – Autolube with Ground-Level Fill
- Ripper Lubrication – Grouped
REAR ATTACHMENTS
- Ripper – Single Shank with Pin Puller
- Ripper - Single Shank – Push Block and Retrieval Hitch with Pin Puller
- Ripper - Single Shank – Push Block and Retrieval Hitch with Pin Puller – Heavy
- Ripper – Multi Shank (three shank)
- Ripper – Multi Shank – Heavy (three shank)
- Ripper – Multi Shank Leach Pad with Pin Puller
- Ripper – Multi Shank – Coal (five shank)
- Counterweight – Rear
- Drawbar with Counterweight
BLADES
- Semi-Universal (27.2 m³/35.6 yd³)
- Universal (34.4 m³/45.0 yd³)
- Carrydozer (43.6 m³/57 yd³)
- Reclamation Universal (42 m³/55 yd³)
- Coal Universal (75 m³/98.0 yd³)
- Coal Universal (65 m³/85.5 yd³)
OTHER
- Fire Suppression Ready
- Fire Suppression Installed