623 Wheel Tractor-Scraper
Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.
Product Images
623 Wheel Tractor-Scraper
623 Wheel Tractor-Scraper
623 Wheel Tractor-Scraper
623 Wheel Tractor-Scraper
623 Wheel Tractor-Scraper
623 Wheel Tractor-Scraper
Product Videos
Wheel Tractor-Scraper CAT® K Series
Wheel Tractor-Scraper K Series Operator Testimonial
Virtual Product Tour (VPT)
360° Exterior View (HTML)
360° Interior View (HTML)
Specifications
| Name | Type | Value | Unit Value (Imperial) | Unit Name | Unit Value (Metric) | Unit Name (Metric) |
|---|---|---|---|---|---|---|
| Flywheel Power - Tractor/Scraper | text | 304 kW (407 hp) | ||||
| Scraper Capacity - Heaped | measurement | 23.0 | yd³ | 17.6 | m³ | |
| Top Speed - Loaded | measurement | 33.5 | mile/h | 53.9 | km/h |
Documents & Spec Sheets
Features & Benefits
BE MORE PRODUCTIVE
- Additional elevator torque.
- Improvement in chain life.
- Enhanced elevator drive sprocket for reduced chain wear.Improved scissor-style chain tension system for decreased sprocket wear, chain wear, and chain jumping.
- Cat C13 engine offers increased power density with a combination of proven electronic, fuel, and air systems.
- Use Ground Speed Control to set the desired top speed, and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
- The Machine Speed Limit feature replaces Top Gear Selection.
- Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
- Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when the machine is working in a cold climate region.
- Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.
WORK IN COMFORT
- Reduce up to 14 individual operator commands per cycle with
Sequence Assist (optional attachment). - Steer with less effort using the newly designed high-pressure steering
system. - Enjoy interior improvements and a more ergonomic work environment
with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature control
.
DESIGNED FOR SAFETY
- Enhance an operator’s awareness of site surroundings with the optional
Work Area Vision System (WAVS). - The seatbelt indicator provides both visual and audible alerts when the seat
belt is not in use. - Ground-level, engine shut-off switch stops all fuel to the engine when
activated and shuts down the machine. - Advanced Cushion Hitch allows the cushion hitch to prevent
end stroke by having the ability to predict end stroke events
and manage the rate of dampening, resulting in reduced hitch maintenance
and improved operator ride in rough conditions.
EASY TO OPERATE
- The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation. - Cat Advanced Ride Management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride. - Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine speed by canceling the throttle
command and engaging the engine compression brake.
INTEGRATED CAT TECHNOLOGIES
- Monitor, manage, and enhance job site operations.
- Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
- Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.
- Shorten the learning curve for inexperienced operators with Sequence Assist and Load Assist (included with Cat Grade
attachment).
EXECUTE EFFICIENCY
- The tractor hydraulic on-demand fan helps assist in lower fuel consumption.
- The Cat C13 tractor engine and C9.3 scraper engine meet U.S. EPA
Tier 4 Final and EU Stage V emission standards, or equivalent to
U.S. EPA Tier 2, or equivalent to U.S. EPA Tier 3 and EU Stage IIIA. - Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Complete Specifications
Engine
| Name | Type | Value | Unit Value (Imperial) | Unit Name | Unit Value (Metric) | Unit Name (Metric) |
|---|---|---|---|---|---|---|
| Flywheel Power - Tractor/Scraper | text | 304 kW (407 hp) | ||||
| Scraper Capacity - Heaped | measurement | 23.0 | yd³ | 17.6 | m³ | |
| Top Speed - Loaded | measurement | 33.5 | mile/h | 53.9 | km/h | |
| Engine Model | text | Cat® C13 | ||||
| Rated Engine RPM | measurement | 2000.0 | r/min | 2000.0 | r/min | |
| Flywheel Power - Tractor | measurement | 407.0 | hp | 304.0 | kW | |
| Note | text | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, or equivalent to U.S. EPA Tier 2, or equivalent to U.S. EPA Tier 3 and EU Stage IIIA. | ||||
| Overall Width | measurement | 11.8 | ft | 3.57 | m | |
| Overall Shipping Height | measurement | 12.37 | ft | 3.77 | m | |
| Scraper Capacity - Heaped | measurement | 23.0 | yd³ | 17.6 | m³ | |
| Scraper Capacity - Struck | measurement | 18.8 | yd³ | 14.4 | m³ | |
| Rated Load | text | 25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons) | ||||
| Width - Cut | measurement | 10.4 | ft | 3.14 | m | |
| Maximum Depth of Cut | measurement | 10.3 | in | 262.0 | mm | |
| Maximum Depth of Spread | measurement | 18.3 | in | 465.0 | mm | |
| 180° Curb-to-Curb Turning Width | measurement | 38.71 | ft | 11.8 | m | |
| Tires - Tractor Drive | text | 33.25R29**E3 | ||||
| Tires - Scraper | text | 33.25R29**E3 | ||||
| Top Speed - Loaded | measurement | 33.5 | mile/h | 53.9 | km/h | |
| Transmission Gear - First | measurement | 3.1 | mile/h | 5.0 | km/h | |
| Transmission Gear - Second | measurement | 5.5 | mile/h | 8.9 | km/h | |
| Transmission Gear - Third | measurement | 7.5 | mile/h | 12.1 | km/h | |
| Transmission Gear - Fourth | measurement | 10.1 | mile/h | 16.3 | km/h | |
| Transmission Gear - Fifth | measurement | 13.6 | mile/h | 21.9 | km/h | |
| Transmission Gear - Sixth | measurement | 18.4 | mile/h | 29.6 | km/h | |
| Transmission Gear - Seventh | measurement | 24.8 | mile/h | 39.9 | km/h | |
| Transmission Gear - Eighth | measurement | 33.5 | mile/h | 53.9 | km/h | |
| Transmission Gear - Reverse | measurement | 5.7 | mile/h | 9.2 | km/h | |
| Final Drive - Each | measurement | 5.0 | gal (US) | 19.0 | l | |
| Differential | measurement | 41.7 | gal (US) | 158.0 | l | |
| Crankcase | measurement | 9.7 | gal (US) | 37.0 | l | |
| Transmission System | measurement | 25.5 | gal (US) | 97.0 | l | |
| Fuel Tank | measurement | 216.09 | gal (US) | 818.0 | l | |
| Hydraulic System | measurement | 21.926 | gal (US) | 83.0 | l | |
| Height - Overall Shipping | measurement | 158.9 | in | 4037.0 | mm | |
| Length - Overall Machine | measurement | 542.0 | in | 13767.0 | mm | |
| Axle to Vertical Hitch Pin | measurement | 17.0 | in | 432.0 | mm | |
| Width - Overall Machine | measurement | 141.1 | in | 3585.0 | mm | |
| Width - Overall Machine - Ladder Down | measurement | 149.2 | in | 3790.0 | mm | |
| Height - Top of Cab | measurement | 142.6 | in | 3621.0 | mm | |
| Height - Scraper Blade Maximum | measurement | 20.5 | in | 520.0 | mm | |
| Width - Tractor | measurement | 133.1 | in | 3381.0 | mm | |
| Width - Inside of Bowl | measurement | 120.0 | in | 3048.0 | mm | |
| Width - Outside Rear Tires | measurement | 128.9 | in | 3275.0 | mm | |
| Front of Tractor to Front Axle | measurement | 122.8 | in | 3119.0 | mm | |
| Wheel Base | measurement | 329.5 | in | 8370.0 | mm | |
| Rear Axle - Rear of Machine | measurement | 89.7 | in | 2278.0 | mm | |
| Ground Clearance - Tractor | measurement | 21.9 | in | 557.0 | mm | |
| Exterior Sound Level | text | The exterior sound power level for the standard machine (ISO 6395:2008) is 114 dB(A). | ||||
| ROPS/FOPS | text | Meets ISO standards | ||||
| Steering System | text | ISO 5010:2007 | ||||
| Rollover Protection Structure (ROPS) | text | ISO 3471:2008 for up to 17 084 kg (37,664 lb) | ||||
| Falling Object Protective Structure (FOPS) | text | ISO 3449:2005 Level II | ||||
| Reverse Alarm | text | ISO 9533:2010 | ||||
| Brakes | text | ISO 3450:2011 | ||||
| Seat Belt | text | SAE J386:JUN1985 | ||||
| Ejector Extend | measurement | 6.5 | s | 6.5 | s | |
| Ejector Retract | measurement | 9.7 | s | 9.7 | s | |
| Bowl Lower | measurement | 3.5 | s | 3.5 | s | |
| Bowl Raise | measurement | 3.0 | s | 3.0 | s | |
| Width - Rear Tire Centers | measurement | 90.2 | in | 2290.0 | mm | |
| Height - Top of Elevator | measurement | 148.3 | in | 3768.0 | mm | |
| Number of Flights | text | 15 | ||||
| Maximum Floor Opening | measurement | 4.4 | ft | 1.34 | m | |
| Overall Length | measurement | 45.18 | ft | 13.77 | m | |
| Elevator Flight Spacing | measurement | 20.0 | in | 520.0 | mm |
Standard Equipment
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
INTEGRATED TECHNOLOGIES
- Sequence Assist, Cat Payload
POWER TRAIN - TRACTOR
- Cat C13
- Cat engine brake
- Electric start, 24 Volt
- Air cleaner, dry type with precleaner
- Fan, hydraulic
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Guard, crankcase
- Muffler (only for less or non-regulated regions engine arrangement only)
- Starting aid, ether
BRAKING SYSTEM
- Primary and secondary, wet disc, hydraulic
- Primary and secondary, wet disc, hydraulic
- Throttle lock
- Parking , hydraulic released, spring applied
TRANSMISSION
- Programmable top gear selection
- Ground speed control
- Machine speed limit
- Guard, power train
- Differential lock protection
- Differential lock
- Transmission hold
- ECPC control
- Standard tire spin reduction
- 8-speed planetary power shift
- APECS software
ELECTRICAL - TRACTOR
- Alternator, 150 Amp
- Batteries (4), 12V, 1,000 CCA, maintenance free, high output
- Electrical system, 24V
- Starting/charging receptacle
LIGHTING SYSTEM - TRACTOR
- Headlights, halogen
- LED Floodlights
- Turn Signals with hazard Function
- Bowl (1)
- Cutting Edge (2)
- Halogen sdie vision (2)
ELECTRICAL - SCRAPER
- Alarm, backup
LIGHTING SYSTEM - SCRAPER
- Trun signals with hazard function, LED
- Brake lights, LED
OPERATOR ENVIRONMENT - TRACTOR
- HVAC system, heat, AC, defrost
- Thermostat control of HVAC system
- Coat hook
- Lunchbox platform with holding strap
- Diagnostic connection (2)
- 12V power ports (2)
- Differential lock (1)
- Dome courtesy light
- Horn, electric
- T-Handle implement control
- Mirror, rearview
- Radio ready
- ROPS/FOPS cab, pressurized
- Seat belt, static two-piece
- Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
- Steering wheel, tilt, telescoping, padded
- Windows, right side emergency egress
- Windows, sliding
- Windows, laminated, zipped in
- Windshield wipers, front and rear windows, includes washers
- Door lock
- Messenger Display
KEYPAD SWITCHES
- Information mode on Messenger Display
- Throttle lock
- Hazard lights
- Retarding level select
- Work lights on/off
- Wipers/washers
SAFETY TAB ROCKER SWITCHES
- Parking Brake
- Regeneration control
GAUGES, WARNINGS INCLUDE:
- Coolant temperature
- Gear selection
- Fuel level
- Bail down
- Cushion hitch
- Engine oil temperature
- Brake system
- System voltage
- Regeneration required
- High beam lights
- Implement lockout
- Throttle lock
- Ejector auto
- Park brake
- Action lamp
- Hydraulic oil temperature
- Differential lock (1)
- Secondary steering
- Transmission hold
- Apron float
- Engine speed, rpm
FLUIDS
- Extended Life Coolant to -37� C (-34� F)
OTHER STANDARD EQUIPMENT - TRACTOR
- Advanced cushion hitch
- Accumulators (cushion hitch) with Canadian Registration Number (CRN)
- Fast oil change
- Fenders, non-metallic
- Heater, engine coolant 120V
- Rims (2)
- Tow pin, front
- Vandalism locks
- Heater, engine coolant 120V
BOWL
- 17.6 m³ (23 yd³), heaped
- 13.5 m� (17.6 yd�), struck
OTHER STANDARD EQUIPMENT - SCRAPER
- Vandalism locks
- Elevator with 15 flights
- Hydraulic position sensing cylinders (bowl lift and apron)
Optional Equipment
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
STEERING ARRANGEMENTS
- Secondary Steering Arrangement
INTEGRATED TECHNOLOGIES
- Product Link
- Cat Grade Control, Cat Payload, Sequence Assist and Load Assist
OTHER ATTACHMENTS
- Camera arrangement - WAVS
- Steering lock - external
- Cab beacon
- Air horn
- Air horn and beacon
- Fender, scraper
- Wiring group
- Year of manufacture plate
WORK LIGHT ATTACHMENTS
- HID work lights
AMBIENT CAPABILITY ARRANGEMENTS
- Cooling, high ambient HRC
- Extended Life Coolant, -50� C (-58� F)
- Cooling, high ambient LRC
- Cooling, low ambient LRC
SERVICE INSTRUCTIONS
- Film arrangement - U.S. (ANSI)
- Film arrangement - International (ISO)