D80 GC

D80 GC Generator Set

Producing reliable power of 80 ekW at 60 Hz, our D80 GC diesel generator sets are designed to meet ISO 8528-5 transient response requirements. All D80 GC generator sets meet EPA Stationary Emergency (Tier 3) emissions standards.

Product Images

Product Videos

Virtual Product Tour (VPT)

Specifications

NameTypeValueUnit Value (Imperial)Unit NameUnit Value (Metric)Unit Name (Metric)
Standby Ratingtext80 ekW
Maximum Ratingtext80 ekW
Minimum Ratingtext80 ekW

View All Specifications (20)

Documents & Spec Sheets

Electric Power Ratings Guide

Download

D80 GC, C4.4, 60 Hz 80 ekW, EPA Tier III Compliant Emissions Spec Sheet

Download

Cat® GC Generator Set Brochure for North America

Download

GCCP 1.2 Control Panel Data Sheet

Download

GCCP 1.5 Control Panel Data Sheet

Download

Features & Benefits

Cat Generator Set Package
  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation
GCCP 1.2 Control Panel
  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
Cooling System
  • Designed to operate in standard ambient temperatures up to 55°C (131°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
  • UL 2200 Listed
  • ULC Certification Available
One Safe Source
  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system
Worldwide Product Support
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Complete Specifications

Generator Set Specifications

NameTypeValueUnit Value (Imperial)Unit NameUnit Value (Metric)Unit Name (Metric)
Standby Ratingtext80 ekW
Maximum Ratingtext80 ekW
Minimum Ratingtext80 ekW
Frequencytext60 Hz
Emissions/Fuel StrategytextU.S. EPA Tier 3 Certified
Voltagetext208 to 600 Volts
Speedtext1800 rpm
Duty CycletextStandby
Engine ModeltextC4.4, In-line 4, 4-cycle diesel
Boremeasurement4.1in105mm
Strokemeasurement5in127mm
Displacementmeasurement269in³4.4l
Compression Ratiotext16.7:1
AspirationtextTurbocharged
Fuel SystemtextCommon Rail
Governor TypetextMechanical, ADEM™A4
Length - Maximummeasurement82.6in2097mm
Width - Maximummeasurement43.3in1100mm
Height - Maximummeasurement52.9in1343mm
Dry Weight - Genset (maximum)measurement950lb2095kg

Standard Equipment

Air Inlet System

  • Air cleaner; light duty with disposable element
  • Air cleaner

Cooling System

  • Radiator and cooling fan with guards
  • Fan drive, battery charging alternator drive
  • Caterpillar extended life coolant
  • Coolant drain line with valve

Control Panel

  • GCCP 1.2 Control panel

Exhaust System

  • Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Fuel System

  • Standard open set fuel tank/base supplied base, formed steel with single wall integral 24-hour fuel tank

Generator

  • Circuit breaker, IEC, 3 pole, mounted in tower panel
  • Voltage regulator (single phase sensing)
  • IP23 Protection
  • Segregated low voltage (AC/DC) wiring panel
  • 12 Leads
  • Tower panel, IP22, bottom cable entry

Governing System

  • Mechanical and electrical governing system - model dependent

Lube System

  • Lubricating oil
  • Oil drain line with valve

Mounting System

  • Includes lifting provision and drag points
  • Termination points for coolant and lube oil drain lines
  • Captive linear vibration isolators between base and engine-generator

Starting/Charging System

  • Batteries
  • 24V battery with rack and cables

General

  • Engine and alternator pre-paint, Caterpillar yellow

Optional Equipment

Alternator System

  • 3 Phase sensing
  • Anti-condensation heater
  • R Frame auxilliary winding
  • Permanent magnet excitation (PMG)

Circuit breakers

  • Circuit breaker upgrades - 4 Pole circuit reaker to 250A, 400A and 630 A

Cooling System

  • Low coolant level shutdown
  • Coolant heater
  • Low coolant temperature alarm

Control Panel Options

  • Earth fault (2 wire only)
  • Overload shutdown via breaker
  • Earth leakage (2 wire only)
  • Volt free contacts
  • Panel mounted audible alarm
  • Battery charger
  • GCCP 1.2 Control panel
  • Control panel heater
  • Voltage adjust potentiometer
  • Emergency stop with key
  • Speed adjust potentiometer

Enclosures

  • Sound attenuated Level 2 enclosure

Fuel System

  • High fuel level alarm
  • Open set narrow tankbase
  • Low fuel level alarm
  • Bunded fuel tank
  • Low fuel level shutdown
  • Compact skidbase for open set
  • Skidbase for CALG enclosure sets

Global Certifications

  • Certification for CIS

Mounting Options

  • Battery removal
  • Industrial silencer
  • Electronic governor
  • External single point lift - enclosure
  • Silencer installation kit

Special Packing/Inspectons for Shipment

  • PGS Test report @ 1.0 power factor
  • PGS Test report @ 0.8 power factor

General - Accessories / Miscellaneous

  • Stone guards/rad trans flange
  • Packing case - canopied set
  • Packing case - compact set

Attachments