C32B

Cat® C32B HRC Diesel Engine

Building on the legacy of the C32, the C32B features strengthenedperformance critical components like cylinder head, block,crankshaft, pistons, rods, and main bearings. Its simple,maintenance free diesel oxidation catalyst (DOC) aftertreatmentmeets U.S. EPA Tier 4 Final, EU Stage V, and other equivalentemissions standards

Product Images

Product Videos

Virtual Product Tour (VPT)

Specifications

NameTypeValueUnit Value (Imperial)Unit NameUnit Value (Metric)Unit Name (Metric)
Maximum Powermeasurement1200hp895kW
Maximum Torquemeasurement4056lb-ft @ 1200 rpm5499Nm @ 1200 rpm
Rated Speedtext1800 rpm

View All Specifications (22)

Documents & Spec Sheets

C32B HRC spec sheet

C32B HRC spec sheet

Download

Features & Benefits

High Power Density
C32B engines have excellent power density with a peak U.S. EPA Tier 4 Final certified rating of 895 kW (1200 hp) and 839 kW (1125 hp) for EU Stage V. Its U.S. EPA Tier 2 equivalent version offers a peak rating of 1007 kW (1350 hp).
Built to Last
The C32B uses a dual-can diesel oxidation catalyst (DOC) aftertreatment. This maintenance-free, passive aftertreatment solution eliminates the need for thermal management or regeneration. The C32B does not require diesel exhaust fluid (DEF), helping minimize total fluid consumption and eliminating the need for any DEF infrastructure (DEF tank, DEF pump, heated DEF lines, additional electronics, and DEF storage on the jobsite). DOC-only simplifies the aftertreatment solution, helps minimize overall package size, and reduces operation costs.
DOC only Aftertreatment
The C32B boasts strength from the inside out. Weighing approximately 50 kg (110 lb) more than its predecessor, the C32B's performance critical components have been strengthened and upgraded to help extend time between rebuilds.

Complete Specifications

Power Rating

NameTypeValueUnit Value (Imperial)Unit NameUnit Value (Metric)Unit Name (Metric)
Maximum Powermeasurement1200hp895kW
Maximum Torquemeasurement4056lb-ft @ 1200 rpm5499Nm @ 1200 rpm
Rated Speedtext1800 rpm
Minimum Powermeasurement1000hp746kW
EmissionstextEU Stage V
Engine ConfigurationtextV-12
Boremeasurement5.7in145mm
Strokemeasurement6.4in162mm
Displacementmeasurement1958.9in³32.1l
Compression Ratiotext15.0:1
AspirationtextTwin Turbocharged Aftercooled (TTA)
Combustion SystemtextDirect Injection
Rotation from Flywheel EndtextCounterclockwise
AftertreatmenttextDOC
Lengthmeasurement73.8in1874mm
Widthmeasurement63in1600mm
Heightmeasurement53.9in1370mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachmentsmeasurement6735lb3055kg
Lengthmeasurement45.5in1156mm
Widthmeasurement17.3in440mm
Heightmeasurement16in407mm
Weightmeasurement150lb68kg

Standard Equipment

Air Inlet System

  • Turbocharged
  • Air-to-Air Aftercooled

Control System

  • Electronic control system
  • Over-foam wiring harness
  • Automatic altitude compensation
  • Power compensated for fuel temperature
  • Configurable software features
  • Engine monitoring system SAE J1939 broadcast and control

Cooling System

  • Thermostats and housing, vertical outlet
  • Jacket water pump, centrifugal
  • Water pump, inlet

Exhaust System

  • Exhaust manifold, dry
  • Optional exhaust outlet

Flywheels and Flywheel Housing

  • Choice of SAE No. 0 or SAE No. 1 flywheel housing

Fuel System

  • MEUI injection
  • Fuel filter, secondary (2 micron)
  • Electronic fuel priming

Lube System

  • Open crankcase ventilation system
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Rear sump oil pan
  • Oil dipstick
  • Gear driven oil pump

General

  • Paint: Caterpillar yellow, with optional colors available on request

Optional Equipment

Attachments