C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)

Documents & Spec Sheets

C7.1 Marine Commerical Prop Spec Sheet (209 bkW - 317bkW)

Download

Features & Benefits

Key Features & Benefits

• Common rail fuel system enables optimum combustion and low emissions
• Reduced combustion noise through advanced electronic control
• 12V or 24V electrical system
• Compatible with Cat^® displays and electronics
• Closed crankcase ventilation system improves engine room cleanliness
• Gear-driven jacket water pump and sea water pump for superior reliability
• Maintenance free valve train with hydraulic valve lash adjusters
• Self-priming fuel system ensures a smooth start every time

Complete Specifications

Power Rating

Name	Type	Value	Unit Value (Imperial)	Unit Name	Unit Value (Metric)	Unit Name (Metric)
Power Range	text	280 bhp - 425 bhp (209 bkW - 317 bkW)
Speed Range	text	2300 - 2700 rpm
Emissions	text	U.S. EPA Tier 3, IMO II, RCD II, China II
Configuration	text	In-line 6, 4-stroke-cycle diesel
Displacement	measurement		428	in³	7.01	l
Aspiration	text	Turbocharged-aftercooled
Governor	text	Electronic (A5E2 V2 ECM)
Flywheel Housing	text	SAE No. 03
Bore	measurement		4.13	in	105	mm
Stroke	measurement		5.31	in	135	mm
Refill Capacity	text	20 L (5.3 gal)
Oil Change Interval	text	500 hrs
Rotation	text	Counterclockwise from the flywheel end
Cooling	text	Heat exchange or keel cooled
Dry Weight	measurement		1676	lb	760	kg
Height	measurement		34.5	in	876	mm
Length	measurement		43.1	in	1095	mm
Width	measurement		31.4	in	798	mm

Standard Equipment

General

• Marine Classification Society (MCS) Approval
• Water-cooled turbocharger and exhaust manifold
• Closed crankcase ventilation system
• Integral engine oil cooler
• Self-tensioning multi-vee alternator drive belt

Fuel System

• Common rail fuel system
• Starter motors - 12V or 24V
• Fuel cooler
• Electric fuel priming pump

Starting System

• Corrosion-resistant sea water aftercooler

Mounting System

• Vibration damper and guard
• Front and rear engine mounting brackets

Cooling System

• Gear-driven seawater pump (rubber impeller)
• Fin and tube-type jacket water heat exchanger

Optional Equipment

Fuel System

• SOLAS double wall high-pressure fuel lines

General

• Engine-mounted secondary alternator - 24V 55 amp or 12V 100 amp
• Analogue gauge displays
• Glow plugs
• Mechanical throttle converter for repower

Cooling System

• Transmission gear oil cooler (engine mounted)
• Jacket water heater
• Cabin heater (calorifier) connections

Exhaust System

• Various 5" and 6" water cooled exhaust elbow configurations

Lube System

• Right-hand and high-level left-hand oil dipsticks

Attachments