Cat C280-6 Marine Generator Set
Cat C280-6 Marine Generator Set
Product Images
Product Videos
Virtual Product Tour (VPT)
Specifications
| Name | Type | Value | Unit Value (Imperial) | Unit Name | Unit Value (Metric) | Unit Name (Metric) |
|---|---|---|---|---|---|---|
| Power Range | text | 1720 - 1820 ekW | ||||
| Frequency | text | 50 / 60 Hz | ||||
| Emissions/Fuel Strategy | text | U.S. EPA Tier 2, IMO II |
Documents & Spec Sheets
Features & Benefits
A3 ECU
Advantages
CAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing
Customer Interface Panel
Advantages
Interfaces with standard Cat® Marine Monitoring System (PLC in Price List), Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection
Electronic Unit Injectors
Advantages
“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required
Complete Specifications
Power Rating
| Name | Type | Value | Unit Value (Imperial) | Unit Name | Unit Value (Metric) | Unit Name (Metric) |
|---|---|---|---|---|---|---|
| Power Range | text | 1720 - 1820 ekW | ||||
| Frequency | text | 50 / 60 Hz | ||||
| Emissions/Fuel Strategy | text | U.S. EPA Tier 2, IMO II | ||||
| Aspiration | text | Turbocharged - Aftercooled | ||||
| Bore | measurement | 11.0 | in | 280.0 | mm | |
| Stroke | measurement | 11.8 | in | 300.0 | mm | |
| Displacement | measurement | 6773.0 | in³ | 111.0 | l | |
| Governor Type | text | Electronic | ||||
| Fuel System | text | EUI | ||||
| Compression Ratio 50 Hz | text | 13.1 | ||||
| Compression Ratio 60 Hz | text | 13:1 | ||||
| Engine Model | text | In-line 6, 4-Stroke-Cycle Diesel | ||||
| Length | measurement | 280.3 | in | 7120.0 | mm | |
| Width | measurement | 77.2 | in | 1961.0 | mm | |
| Height | measurement | 154.9 | in | 3934.0 | mm | |
| Weight - Estimated | measurement | 18000 | lb | 8165.0 | kg |
Standard Equipment
General
- LH or RH service connections
Air Inlet System
- Aftercooler — fresh water, corrosion resistant coated
- Crankcase breathers, top-mounted
- Single turbocharger, rear-mounted, engine oil lubricated
Exhaust System
- Air inlet adapter - Straight / 90 degree / 35 degree
- Dry, gas tight, exhaust manifold
- Turbo speed sensors - overspeed protection
- Exhaust manifold shielding, soft
Control System
- Dual Caterpillar ADEM A4 Electronic Engine Control Modules
- Rigid Wiring Harness
Cooling System
- Aftercooler/oil cooler and jacket water pumps (gear driven)
- Engine coolant water drains
- Single Circuit / Separate Circuit Aftercooler
Fuel System
- Fuel transfer pump, gear driven
- Electronically Controlled Unit Injectors
Instrumentation
- CAT Alarm & Protection System
Lube System
- Oil pump, gear driven
- 2 element oil cooler, engine mounted
- Duplex centrifugal oil filter - engine mounted
- Wet sump
- Prelube pump - air / electric
Protection System
- Mounted oil mist detector
- Crankcase explosion relief valves
Optional Equipment
Fuel System
- Fuel priming pump
- Duplex fuel filters
- SOLAS shielding
Lube System
- Front and rear oil pan drains
- SOLAS shielding
Protection System
- Cylinder pressure relief valves